BrainBox AI Stat 2 215H Thermostat Documentation

⚠️

DANGER — RISK OF ELECTRIC SHOCK

Contact with live electrical parts can cause serious injury or death.
Disconnect or turn off all power before beginning installation or service work. Failure to do so may result in electric shock, serious injury, or death. Lock out and tag out all energy sources and verify that the equipment is de-energized before handling.
Verify that the supply voltage matches the product specifications. Consult the device’s datasheet for power consumption, operating temperature range, and other environmental requirements.
Ensure that all equipment is installed in accordance with applicable local, regional, and national regulations and the manufacturer’s applicable installation instructions. All wiring must comply with the relevant electrical wiring diagrams and electrical codes.

⚠️

NOTICE — RISK OF PRODUCT DAMAGE

Electrostatic discharge (ESD) can damage the product. Personal grounding equipment must be worn throughout all installation and service activities.
Do not touch individual electrical components, as doing so can cause ESD and negatively affect product performance.
Do not stretch or use cable sets that are too short or otherwise insufficient for the application.

⚠️

WARNING — RISK OF ELECTRIC SHOCK, FIRE, OR PRODUCT MALFUNCTION

Do not tamper with electrical contacts.
Do not modify the product in any way.
Do not alter the internal wiring or installation circuitry.
Use the product only for its intended purpose.
Unauthorized modification, tampering, misuse, or alteration of wiring or circuitry may result in electric shock, fire, product malfunction, property damage, serious injury, or death.

⚠️

WARNING — RISK OF BURN OR FIRE

Do not exceed the product’s maximum wattage, ratings, or published operating conditions. Doing so may cause overheating, fire, or burn injuries.
Do not overload the device.
Follow all manufacturer warnings, recommendations, and restrictions to ensure safe and proper operation.

⚠️

WARNING — RISK OF INJURY

Wear gloves and safety glasses at all times during installation, servicing, and maintenance. Failure to use appropriate personal protective equipment may result in cuts, abrasions, or eye injury.
Avoid working in areas where corrosive, deteriorating, or explosive vapors, fumes, or gases may be present.
Use safe lifting techniques and obtain assistance or mechanical aids when handling heavy units. Beware of sharp edges, pinch points, and stored mechanical or electrical energy during installation and service.
Al installation, servicing, and maintenance must be performed only by trained and qualified personnel in accordance with applicable codes and regulations. Do not remove, deface, or obscure any safety labels affixed to the product; replace any label that becomes illegible.

Documentation

BrainBox AI Stat 2

Datasheet

IT Requirements Guides

Solutions

Expertise

Resources

About

⚠️	DANGER — RISK OF ELECTRIC SHOCK Contact with live electrical parts can cause serious injury or death. Disconnect or turn off all power before beginning installation or service work. Failure to do so may result in electric shock, serious injury, or death. Lock out and tag out all energy sources and verify that the equipment is de-energized before handling. Verify that the supply voltage matches the product specifications. Consult the device’s datasheet for power consumption, operating temperature range, and other environmental requirements. Ensure that all equipment is installed in accordance with applicable local, regional, and national regulations and the manufacturer’s applicable installation instructions. All wiring must comply with the relevant electrical wiring diagrams and electrical codes.
⚠️	NOTICE — RISK OF PRODUCT DAMAGE Electrostatic discharge (ESD) can damage the product. Personal grounding equipment must be worn throughout all installation and service activities. Do not touch individual electrical components, as doing so can cause ESD and negatively affect product performance. Do not stretch or use cable sets that are too short or otherwise insufficient for the application.
⚠️	WARNING — RISK OF ELECTRIC SHOCK, FIRE, OR PRODUCT MALFUNCTION Do not tamper with electrical contacts. Do not modify the product in any way. Do not alter the internal wiring or installation circuitry. Use the product only for its intended purpose. Unauthorized modification, tampering, misuse, or alteration of wiring or circuitry may result in electric shock, fire, product malfunction, property damage, serious injury, or death.
⚠️	WARNING — RISK OF BURN OR FIRE Do not exceed the product’s maximum wattage, ratings, or published operating conditions. Doing so may cause overheating, fire, or burn injuries. Do not overload the device. Follow all manufacturer warnings, recommendations, and restrictions to ensure safe and proper operation.
⚠️	WARNING — RISK OF INJURY Wear gloves and safety glasses at all times during installation, servicing, and maintenance. Failure to use appropriate personal protective equipment may result in cuts, abrasions, or eye injury. Avoid working in areas where corrosive, deteriorating, or explosive vapors, fumes, or gases may be present. Use safe lifting techniques and obtain assistance or mechanical aids when handling heavy units. Beware of sharp edges, pinch points, and stored mechanical or electrical energy during installation and service. Al installation, servicing, and maintenance must be performed only by trained and qualified personnel in accordance with applicable codes and regulations. Do not remove, deface, or obscure any safety labels affixed to the product; replace any label that becomes illegible.